Kingfisher Building Products Logo KOLOURSEAL
"Roof Renovation"
Home Page
Online Shop

Kingfisher Building Products Ltd
Tel: 01229 869 100

Kolourseal20L pack: £125.66 +VAT - BUY NOW! brush on or spray
Rejuvenate your old roof with "Kolourseal"
Over time the weather, pollution and environmental factors all take their toll on your roof. Manufactured tiles in particular lose their water resistance after around twenty years and many roofs become porous as a result.
This in turn causes secondary problems as dampness permeates into the structural fabric of your house.
Once a roof starts becoming porous, the tiles act like a sponge, retaining water and encouraging the growth of unsightly moss, green mould and lichens.
The retained moisture also increases load on the roof trusses and leaves the roof vulnerable to the Winter freeze/thaw cycle, which causes further degradation.
Kingfisher "Kolourseal" is the cost effective solution to these problems and can save you £1000s compared to stripping off old tiles and fitting a new roof.
  • Concrete tiles
  • Asbestos tiles
  • Clay tiles
Moisture builds up in porous roof tiles

Tiled roof before and after
Why Choose Kingfisher "Kolourseal"?
  • Stunning "New Roof" appearance
  • Increased property value
  • Waterproofs porous tiles
  • Reduces stress on roof structure
  • Extends the roof life by at least 10 yrs
  • Resists moss and mould growth
  • Improves gutter drainage
  • Blends repairs and extensions
  • Water based . environmentally friendly
  • Range of colours
Asbestos roof before and after
Full roof before
Custom Black Kolourseal applied
This property on the left  has been enhanced with a custom black "Kolourseal" treatment shown on the right.

20L pack: £125.66 +VAT - BUY NOW!



Kolourseal Colours
A range of standard colours


Brown Terracotta Mid -grey Light-grey Dark Terracotta
Custom colours available. Due to online colour reproduction, colours shown are approximate.

Leaders in Waterproof Technology
Kingfisher has been manufacturing outstanding water proofing products for the construction industry for over 15 years.
"Kolourseal" uses the latest polymer technology to produce a highly durable and attractive finish.
Enhance your Home
For most of us our home is our biggest asset and it has been repeatedly demonstrated that well maintained and fresh looking properties sell faster and  command higher prices. 
"Kolourseal" is an advanced micro polymer system which will not only re-seal your porous roof tiles but will also transform the appearance of your old roof and add value to your property.
Developed at our Lakeland factory for the worst of the British climate, we believe that "Kolourseal" sets new standards in severe weather protection.
In addition the U.V fade resistant colours will give your home a lasting appeal.
All this at a fraction of the cost, mess and disruption involved in fitting a new roof.
Guaranteed for 10 years
Where "Kolourseal" is applied by an approved Kingfisher contractor, an optional 10 year guarantee is available.
Approved Contractors
Your Kingfisher approved contractor has been trained in the correct preparation of the surfaces and application of our products. You can therefore have confidence that the work will be completed to the highest possible standards.
The job underway
The Job underway

roof survey
1. The "Kolourseal" System.
  1. Roof survey and assessment.
  2. Repair or replace any cracked or slipped tiles. Re-point as required.
  3. "Bung" gutter down pipes to prevent debris blockage.
  4. Wash down roof with pressure washer.
    Use stiff bristle brush to remove stubborn contaminants.
    Allow roof to dry. Take care ladders can crack tiles.
  5. Sanitise roof by spraying with Kingfisher "Biocidal Wash" to kill algae and moss.
  6. Remove vehicles from the vicinity and protect fragile plants.
  7. Apply primer (asbestos roofs only).
  8. Apply Kolourseal first coat (brush or spray).
  9. Apply Kolourseal second coat (brush or spray).

Application Data
Kingfisher "Biocidal Wash"
Apply neat by brush or spray to the entire roof surface and leave to penetrate.  Coverage is 4-6 sq metres per litre.
Note: If roof is contaminated with moss it may be necessary to "spot" treat certain heavily soiled areas after wash down.

Packaging: 5 litres
Kingfisher "Kolourseal"
Apply two coats by brush or spray, working first coat thoroughly into joints, tile ends  and substrate.
Coverage (depending on porosity):
3 to 5 sq metres / litre (1st coat)
5 to 6 sq metres / litre (2nd coat)

Allow 4 to 6 hours between coats depending on weather / temperature. 

Do not apply at temperatures below 6 deg C or if roof surface temperature exceeds 32 deg C.

Do not apply in wet weather or if rain is expected within 6 hours of final coat.

Packaging : 20 Litres
20L pack: £125.66 +VAT
- BUY NOW!
First coat
Final Coat

© Copyright Kingfisher Building Products Ltd 2006